But after installation (or just partitioning), it will prompt you that the operating system cannot be found after restarting. This is because the hard disk has been partitioned and there is a boot record. It is possible that the partition is not activated when partitioning. The virtual machine has found the partition of the hard disk, but the partition has not been activated, so it will stop and will not skip. .
Operating System not found Solution: Reinstall the operating system correctly. It is best to install it with a normal xp CD, and try not to install it with a ghost xp CD. In this way, xp's driver support for VM virtual machine is the best.
Your problem is usually that these three pictures are not right. Try to set it again with the mouse inside. Among them, the third one should pay attention to.Checking connect at power on is to automatically connect the optical drive after power-on. If you don't choose this one, you absolutely can't. The system can't be installed without it.
First of all, if you It is used as a resultVirtual optical drive, you must first create a new virtual machine and then install the virtual optical drive, so such a problem will occur. ( Please install the virtual optical drive first, then create a new virtual machine, and then load the mirror file with the virtual optical drive to solve the problem).
Reformat the C disk or reboot the system partition file with the DG partition tool in the boot system file.
Open the virtual machine - there is a small CD-like icon in the lower right corner. Right-click and select "Settings", click before the "Use ISO Image" option, and then select the specific place where you store the image in the "Browse" below to make sure. In addition, if there is a problem with the system of your virtual machine, it is recommended that you reinstall it.
You only installed the virtual machine yourself, and then chose to create a new virtual machine. You didn't install the operating system at all. Of course, you can't find it.You use a mirror file to install the system, but the boot selection is DVD/CD. The mirror file can't be found, and of course the operating system can't be found.
You need to download one of this tool on the Internet. Pay attention to download the Linux version and then command the installation in the terminal. Order. There are many on the Internet, and you don't need to install this tool. This tool is to drag files between two systems. There is an option in the middle of the virtual machine to share the directory, which is the same as this tool.
System installation failed, just replace the verified system disk and reinstall the system directly, so that the problem of installing the win7 system in the virtual machine can be solved automatically and smoothly throughout the whole process. It is okay to use a USB flash drive or a hard disk, and the installation speed is very fast.
1. The file is damaged. When the files of the win10 virtual machine are missing or damaged, the operating system cannot be loaded when using the virtual machine. It can be solved by uninstalling and reinstalling the virtual machine to ensure that the files are complete. Lack of operating system.
2. Your system has not been installed successfully. What system is installed on your Apple computer? If you want to install the win10 system, it is recommended that you use the Microsoft installation version to install it.
3. Download the win10 mirror file on the Apple computer, or copy the win10 mirror to the Apple computer with a USB flash drive.
4. Dual-system installation Win10 steps: Open Launchpad--Enter Other--Open Boot Camp Assistant, check the first and third options and press Continue.
5. Figure 1: Mac virtual machine installation Win10 step 1 screenshot Parallels Desktop 11, like the previous version, provides three installation media for users to choose from: CD-ROM, mirror file and USB drive. The software will automatically scan the operating system that can be installed, and Windows 10 has been automatically found here.
OKX download-APP, download it now, new users will receive a novice gift pack.
But after installation (or just partitioning), it will prompt you that the operating system cannot be found after restarting. This is because the hard disk has been partitioned and there is a boot record. It is possible that the partition is not activated when partitioning. The virtual machine has found the partition of the hard disk, but the partition has not been activated, so it will stop and will not skip. .
Operating System not found Solution: Reinstall the operating system correctly. It is best to install it with a normal xp CD, and try not to install it with a ghost xp CD. In this way, xp's driver support for VM virtual machine is the best.
Your problem is usually that these three pictures are not right. Try to set it again with the mouse inside. Among them, the third one should pay attention to.Checking connect at power on is to automatically connect the optical drive after power-on. If you don't choose this one, you absolutely can't. The system can't be installed without it.
First of all, if you It is used as a resultVirtual optical drive, you must first create a new virtual machine and then install the virtual optical drive, so such a problem will occur. ( Please install the virtual optical drive first, then create a new virtual machine, and then load the mirror file with the virtual optical drive to solve the problem).
Reformat the C disk or reboot the system partition file with the DG partition tool in the boot system file.
Open the virtual machine - there is a small CD-like icon in the lower right corner. Right-click and select "Settings", click before the "Use ISO Image" option, and then select the specific place where you store the image in the "Browse" below to make sure. In addition, if there is a problem with the system of your virtual machine, it is recommended that you reinstall it.
You only installed the virtual machine yourself, and then chose to create a new virtual machine. You didn't install the operating system at all. Of course, you can't find it.You use a mirror file to install the system, but the boot selection is DVD/CD. The mirror file can't be found, and of course the operating system can't be found.
You need to download one of this tool on the Internet. Pay attention to download the Linux version and then command the installation in the terminal. Order. There are many on the Internet, and you don't need to install this tool. This tool is to drag files between two systems. There is an option in the middle of the virtual machine to share the directory, which is the same as this tool.
System installation failed, just replace the verified system disk and reinstall the system directly, so that the problem of installing the win7 system in the virtual machine can be solved automatically and smoothly throughout the whole process. It is okay to use a USB flash drive or a hard disk, and the installation speed is very fast.
1. The file is damaged. When the files of the win10 virtual machine are missing or damaged, the operating system cannot be loaded when using the virtual machine. It can be solved by uninstalling and reinstalling the virtual machine to ensure that the files are complete. Lack of operating system.
2. Your system has not been installed successfully. What system is installed on your Apple computer? If you want to install the win10 system, it is recommended that you use the Microsoft installation version to install it.
3. Download the win10 mirror file on the Apple computer, or copy the win10 mirror to the Apple computer with a USB flash drive.
4. Dual-system installation Win10 steps: Open Launchpad--Enter Other--Open Boot Camp Assistant, check the first and third options and press Continue.
5. Figure 1: Mac virtual machine installation Win10 step 1 screenshot Parallels Desktop 11, like the previous version, provides three installation media for users to choose from: CD-ROM, mirror file and USB drive. The software will automatically scan the operating system that can be installed, and Windows 10 has been automatically found here.
732.21MB
Check662.19MB
Check434.41MB
Check636.81MB
Check199.45MB
Check934.79MB
Check322.95MB
Check211.16MB
Check119.95MB
Check622.77MB
Check681.26MB
Check579.66MB
Check347.52MB
Check728.76MB
Check643.95MB
Check264.11MB
Check649.25MB
Check882.21MB
Check965.24MB
Check529.33MB
Check781.96MB
Check168.21MB
Check666.21MB
Check989.52MB
Check626.12MB
Check535.31MB
Check963.57MB
Check679.97MB
Check777.19MB
Check265.22MB
Check253.39MB
Check571.14MB
Check714.78MB
Check415.68MB
Check967.32MB
Check383.32MB
CheckScan to install
OKX download to discover more
Netizen comments More
211 仰面朝天网
2025-02-02 21:37 recommend
2942 不知甘苦网
2025-02-02 21:10 recommend
892 读书三到网
2025-02-02 20:59 recommend
1023 喜眉笑眼网
2025-02-02 19:49 recommend
1880 捭阖纵横网
2025-02-02 19:46 recommend